• Cut and fill QueensMineDesignWiki

    • Ore grade/method cost • Rock quality • Waste Disposal The ore body must be narrow and steeply dipping as the method relies on gravity to draw ore. Cut and fill is a very expensive mining method, due in large part to the high costs of backfill. This cost can be justified if the ore

  • Main Page · Course Outline · Design Topics · Social Engagement · Mine Guides · Contents
  • Design in Weak Rock Masses: Nevada Underground Mining

    mechanized cut-and-fill. This method is amenable to achieving a high rate of recovery when mining irregular ore geometries. Variations on this method are practd at different mines and within different areas of the same operation, depending upon rock quality. Underhand cut-and­ fill mining (3) is employed and larger spans are required

  • 文件大小: 444KB
  • Underground mining (hard rock) Wikipedia

    Cut and fill mining is a method of short-hole mining used in steeply dipping or irregular ore zones, in particular where the hanging wall limits the use of long-hole methods. The ore is mined in horizontal or slightly inclined sls, and then filled with waste rock, sand or tailings. Either fill option may be consolidated with concrete or left

  • Types of Mining Methods Sell Side Handbook

    Mar 09, 2018· Cut-and-fill stoping is a preferred method for high grade ore bodies with a steep dip size or irregular shape or vein structure. It is a versatile method that provides high ore recovery and is suitable for deposits that require mining ore out of selected ore pockets. Cut-and-fill allows selective mining and separate recovery of high grade

  • Ore Dressing Methods 911metallurgist

    Gold Ore ProcessingMethods of Ore TreatmentAmalgamationConcentrationCyanidationGold-Milling DataThe fact that a product of high value and small bulk can be produced at a gold mine, often by relatively simple milling processes, has made it possible to operate gold mines successfully in remote and inhospitable regions where high costs of transportation, fuel, and power would make it impossible to exploit profitably base-metal ores of equal dollar value. As a result, in many instances gold-mine development has been the advance guard of civilization in regions where other mineral resources were
  • Underground Mining Methods — New Pacific Metals

    Cut and fill mining can be expensive, but this method allows for highly selective mining with less waste rock or low-grade ores mined-out (which keeps production costs low). It’s typically used in situations where the orebody dips steeply or is very irregular, which makes mechanized long-hole methods difficult to

  • Description of mining methods (step by step)

    Primary Mining Method Cut-and-Fill mining method. Information. Development in the ore of the upper and lower drift. The distance between the levels is 91 m (300 ft). Development of the serv raise. Excavation of the stope. Two options: the first option consists in starting the stope from the level.

  • Cho of Method

    At the Con mine, four types of method are commonly used: shrinkage, conventional cut-and-fill, mechanized cut-and-fill and longhole. The mining method evaluation and selection are made individually for each geological block. For the evaluation, the following criteria are considered: ore geometry, ore continuity, mechanized access already close by,

  • Mine Backfill MiningInfo

    Mechanized cut and fill mining refers to cut and fill stopes that are accessible by rubber tired equipment from the regular mine access development. Mechanized cut and fill stopes can be very productive with stope widths in excess of 40 m in good ground conditions and stope lift

  • Narrow vein minimum dilution case study AMC Consultants

    Vein CharacterizationOptimized Dilution ScenariosFormulaeBenchmarking and Case StudiesEquipmentOptimized Stope and Drive DilutionCase Study Guidelines and Processes to Reduce DilutionThe dilution study began with vein characterization. The broad aim was to identify the general variability in vein width, geometry, and lateral extent (strike and dip) and, as far as practicable, to identify geotechnical conditions that may determine the applicability of various mining methods. The findings included: 1. Consistent vein strike 1,500 m. 2. Vein width ranging from 0.5 m to more than 5 m. 3. Ground condition ranging from poor to good, across strike and depth extents. 4. Cemented rockfill and waste ro[PDF]
  • Design in Weak Rock Masses: Nevada Underground Mining

    mechanized cut-and-fill. This method is amenable to achieving a high rate of recovery when mining irregular ore geometries. Variations on this method are practd at different mines and within different areas of the same operation, depending upon rock quality. Underhand cut-and­ fill mining (3) is employed and larger spans are required

  • Underground Mining Methods — New Pacific Metals

    Cut and fill mining can be expensive, but this method allows for highly selective mining with less waste rock or low-grade ores mined-out (which keeps production costs low). It’s typically used in situations where the orebody dips steeply or is very irregular, which makes mechanized long-hole methods difficult to

  • Underground mining (hard rock) Wikipedia

    Cut and fill mining is a method of short-hole mining used in steeply dipping or irregular ore zones, in particular where the hanging wall limits the use of long-hole methods. The ore is mined in horizontal or slightly inclined sls, and then filled with waste rock, sand or tailings. Either fill option may be consolidated with concrete or left

  • Description of mining methods (step by step)

    Primary Mining Method Cut-and-Fill mining method. Information. Development in the ore of the upper and lower drift. The distance between the levels is 91 m (300 ft). Development of the serv raise. Excavation of the stope. Two options: the first option consists in starting the stope from the level.

  • [DOC]
  • CUT-AND-FILL MINING Oraee

    The standard application is that cut-and-fill can be applied to steeply dipping ore bodies with reasonably firm ore. Compared with sublevel stoping and shrinkage, used in similar conditions, cut and fill offers the advantage of almost full selectivity. The method can be applied to irregular ore bodies with any type of

  • Stoping methods Indian Copper Complex copper mining

    Room and pillar stoping is generally used where the ore is between 1m and 4m thick. Ore extraction is about 65%. Where the width of the orebody and roof conditions permit, the ore is mined bya standard horizontal mechanized cut and fill method.

  • Mechanized Cut and Fill Mining Long Shaft Kambalda

    In line with mining operations throughout Australia, Western Mining Corporation Limiter’ is striving to increase productivity by intro- ducing mechanized mining techniques wherever possible. Kambalda Nickel Operations’ (K.N.O.) largest operating nickel mine, Long Shaft, is currently introducing mechanized cut and fill methods which must provide flexibility to cater for an orebody that

  • Major Mines & Projects COSE (Cap-Oeste Sur Este) Project

    The proposed method for mining the COSE deposit is mechanized cut and fill, where 3.0 m x 3.0 m access drifts to the ore are developed every 9 m, vertically, off of the access decline. Once a mining cut (3 m high, the length of the deposit) is completed, it is backfilled with un-cemented, screened, mine development waste rock, or possibly waste

  • Major Mines & Projects Guanajuato Mine

    The Cata ore zones are being mined by a mechanized cut and fill method. An access ramp is located in the hanging-wall from which cross-cuts are driven to access the ore at the various lift elevations. The ramp is approximately 3.5 metres by 3.5 metres and is supported by a combination of grouted rebar, wire mesh and straps as required.

  • Caeté Complex Jaguar Mining Inc.

    The Caeté Mining Complex (CCA) is composed of two underground mines (Roça Grande Mine and Pilar Mine) that utilize a combination of mechanized cut and fill and sub-level stope mining methods. Ore produced from these mines is transported to the 2,200 tonnes per day gravity, flotation and CIL treatment of flotation concentrate, processing plant

  • Mining Blasthole stoping Britannica

    Mining Mining Blasthole stoping: When the dip of a deposit is steep (greater than about 55°), ore and waste strong, ore boundaries regular, and the deposit relatively thick, a system called blasthole stoping is used. A drift is driven along the bottom of the ore body, and this is eventually enlarged into the shape of a trough. At the end of the trough, a raise is driven to the drilling

  • [PDF]
  • Reducing Dilution With Narrow-vein Mining

    What is ore loss 5. Ore loss. can similarly be classified as planned and unplanned dilution. Planned. ore loss. represents the. ore-grade material that has been excluded from the mining block at the. stope. design stage, whereas unplanned. ore loss. is the part of

  • (PDF) Underground mining Methods ResearchGate

    The method is similar to cut and fill mining with the ex ception that after being blasted, broken ore is left in the stope where it is used t o support the surrounding rock and as a platform from

  • [PDF]
  • SECTION 10 SHRINKAGE METHODS Mike Turner Australian

    Sub-level stoping, cut and fill mining and sub-level caving have generally replaced shrinkage mining in Australia, Europe and Canada. The method is still used in a handful of non-mechanised mines in South America, Africa, Asia and Canada. 10.1.1.1 Disadvantages The method is our intensive and requires experience in such methods. The ing